Table of Contents
Advertisement
Vertical Expnd (H-Series)
This parameter allows you to specify dot character vertical expansion for both ASCII and DBCS
characters in DBCS mode.
Graphics Spd Up (H-Series)
This menu is used to increase (speed up) graphic printing speed by turning on the Enhanced/Turbo
mode.
•
Normal (factory default). The printer prints at the given input graphics resolution.
•
Enhanced. The printer provides first-level speed up, which means the speed is faster than Normal
mode.
•
Turbo. The printer provides second-level speed up, which means the speed is faster than Enhanced
mode.
•
Match Typeface. The input 180x180 dpi graphics resolution will drop-dot to the resolution which
matches the typeface selected.
Page Format
Form Length
Forms length is the number of lines that can be printed on a page. You can set the form length in inches,
millimeters (mm), or as a function of the current lpi (lines per inch).
NOTE: When IPDS is active, the form length only displays as a function of lines.
Form Width
The form width can be specified in inches, millimeters, or as a function of the current cpi (characters per
inch). The forms width set should not exceed the actual paper width.
NOTE: When IPDS is active, the form width only displays as a function of characters.
Margins
•
Left Margin. Set in columns. Column zero is defined as the far left edge of the page, and column
numbering increments from left to right.
•
Right Margin. Set in columns. Column zero is defined as the far right edge of the page, and column
numbering increments from right to left.
•
Bottom Margin. Defined in lines, starting from line zero at the bottom of the page and incrementing
from the bottom up.
Perforation Skip
•
Disable (factory default). Allows printing on page perforation.
•
1/2 inch, 2/3 inch, 5/6 inch, 1 inch. You may set up a skip-over margin of 1/2 inch, 2/3 inch, 5/6
inch, or 1 inch. For example, a skip-over margin of 1 inch allows a 1 inch margin at the bottom of the
page.
Print Char. Set
When this selection is displayed and the ENTER key is pressed, the current character set is printed.
Indian Option
•
Indian Formatter. The available options include Disable, Script Page, and Data Page.
•
Disable (factory default). The Indian characters will print without composing.
118
Advertisement
Table of Contents
