Table of Contents
Advertisement
Analyzer
Activate
No
Yes*
Input
Emulation
Epson FX*
Disabled*
Epson LQ
Enabled
Proprinter XL
HP
ANSI
CITOH
Analyzer Activate
When the analyzer is deactivated all incoming data from the host is passed directly through the Analyzer
to the LinePrinter Plus printer emulation without any processing. The Analyzer only responds to the
command: activate analyzer.
•
Yes (factory default). The emulations under the Analyzer menu are active.
•
No. The data is passed down to the LinePrinter Plus printer emulation without any modification.
Input Emulation
Set the input emulation according to the application you are using.
•
Epson FX (factory default). The Epson-FX emulation.
•
Epson LQ, Proprinter XL, HP, ANSI, CITOH. Other available emulations.
Automatic Carriage Return
When Auto CR is enabled, the analyzer sends the printer a Carriage Return each time it receives a Line
Feed. The default is Disabled.
NOTE: You have to use this item to enable the Auto Carriage Return instead of the menu under the
LinePrinter Plus menu as long as the analyzer is active.
Automatic Line Feed
When Auto LF is enabled, the analyzer sends the printer a Line Feed each time it receives a Carriage
Return. The default is Disabled.
NOTE: When you want to enable the Auto Line Feed (Auto LF), use the item under the analyzer menu
not the one under the LinePrinter Plus menu as long as the analyzer is active.
178
Emulation
Auto CR
Auto LF
Disabled*
Enabled
Custom
Arabization
Settings
Refer to the next
0*
page
Range (0 -> 999) Step 1
PUM
Lines/Columns
Decipoints*
Default DP
Wrap Around
Data Processing
Disabled*
DP Enhanced*
Enabled
Advertisement
Table of Contents
