Printronix P8000 Plus Series Administrator's Manual page 123

Alt. Set 80-9F
Determines whether the printer processes ASCII codes hex 80 through hex 9F as control codes or as
printable characters. The options include:
•
Control Code (factory default)
•
Printable.
Character Set
Specifies a character set as shown in the P-Series Character Set Menu on page 124. To use one of these
sets, choose the desired group heading (such as European Sets) and press ENTER. Then choose the
desired set within that group (such as Roman 8) and press ENTER. Both the group and the desired set
will be starred to indicate your selection. The UTF-8 selection allows printing of UTF-8 encoded Unicode
™. Character sets are shown in detail in the Character Sets Reference Manual.
SFCC d Command
•
Even dot plot (factory default). This option interprets SFCC d Command as even dot plot.
•
Double High. This option interprets SFCC d Command as double high. Select this option for
backward compatibility.
PSeries Dbl High
Allows printing compatibility between current and older model printers.
•
Normal (factory default). This is normal, double-high printing for current model printers.
•
P3/4/6/9 Compat. Where older printers print two dot rows higher, this option allows for compatibility
by raising the print two dot rows to match the current models dot row value (two dot rows lower).
FF Valid at TOF
•
Enable (factory default). Performs a form feed when the host sends a Form Feed command and the
printer is at the top of form.
•
Disable. Will not perform a form feed when the host sends a Form Feed command and the printer is
at the top of form.
123