Table of Contents
Advertisement
Define CR Code
The Define CR Code option controls the action of the printer when it receives a Carriage Return code
(hex 0D) from the host computer. If this feature is enabled, each time the printer receives a Carriage
Return, it inserts an additional Line Feed code (hex 0A) into the data stream. Do not use this feature if the
host computer sends Line Feeds to the printer.
•
CR = CR (factory default). Does not insert an extra Line Feed after each Carriage Return.
•
CR = CR + LF. Inserts an extra Line Feed after each Carriage Return.
Autowrap
This option defines the printer actions when print data is received past the forms width setting.
•
With LF+CR (factory default). Performs an automatic carriage return and line feed when data is
received past the forms width.
•
With CR. Performs an automatic carriage return (without line feed) when data is received past the
forms width.
•
Disable. Discards any data past the forms width.
Define LF Code
The Define LF Code option controls the action of the printer when it receives a Line Feed code (hex 0A)
from the host computer. If this feature is enabled, each time the printer receives a Line Feed, it inserts an
additional Carriage Return code (hex 0D) into the data stream. This feature can be used in most
installations, but it is required if the host computer does not send Carriage Returns to the printer.
•
LF = CR + LF (factory default). Adds an extra Carriage Return with each Line Feed.
•
LF = LF. Does not add a Carriage Return with a Line Feed.
Printer Select
•
Disable (factory default). Ignores the ASCII DC1 and DC3 control codes.
•
Enable. Disables the printer when a DC1 control code is received, and enables the printer when a
DC3 control code is received.
Character Set
This parameter selects a character set for the Epson
20 CPI Condensed
Compressed print characters are narrower than the normal character set. This is helpful for applications
for which you need to print the maximum amount of information on a page.
•
Enable (factory default). Prints about 60 percent of the width of normal characters when compressed
print is chosen by the host computer. For example, a 12 CPI Draft font will compress to 20 CPI.
•
Disable. Does not compress print widths, even if condensed print is chosen by the host.
Alt. Set 80-9F
•
Control Code (factory default). Interprets data in the range of hex 80 through hex 9F as a control
code.
•
Printable. Prints data in the range of hex 80 through hex 9F.
®
emulation.
107
Advertisement
Table of Contents
