Basic Dante Av-H™ System Setup - Bolin Technology D Series User Manual

Basic Dante AV- H™ System Setup
D2-210 / D2-220H PTZ camera
D
Flo
IR Remote Control
PC running Dante
Controller and Dante Studio™
o
Dante-enabled devices can happily coexist with other networking equipment such as general-purpose
PCs actively sending and receiving email and other data.
o
Ethernet cables: CAT5e, CAT6 (required for PTZ camera(s) and PoE+) or higher.
o
All Dante AV™ devices within the same Dante network will be automatically discovered in Dante
Controller.
Dante AV-H™ Basic Setup
Bolin camera and controller powered
via 1Gbps PoE+ network switch.
HDMI / SDI cable direct
to display monitor
1Gbps PoE+ Network Switch
Bolin PTZ IP controller
VISCA Over IP
1 Gbps Dante AV™ Over IP Network
Network Cables
31
Display Monitor
Dante™ audio devices