System Configuration - Bolin Technology VCC-7 Series User Manual

System Configuration

Connection
When the camera is connected to a computer and joystick keyboard with a VISCA cable (cross type, RS-232), you can
operate the camera with the computer and the joystick keyboard.
When the camera is connected to a joystick keyboard with a control cable (cross type, RS-422/485), you can operate the
camera's pan, tilt, zoom with the joystick keyboard.
When the camera is connected to a IP joystick keyboard with a network cable, you can operate the camera's pan, tilt,
zoom with the joystick keyboard via IP Onvif or Visca-Over-IP protocol.
In this connection configuration, HDMI cable, SDI video cable, data cable, Network cable is required. To obtain these third-
party components or accessories, consult the dealer where you bought your camera.
Connection with Serial + IP control with SDI/HDMI + IP video output
Connection with Serial + IP control with SDI/HDMI + IP video output via HDBaseT output.
12