On Screen Display (Osd) Settings & Options - Bolin Technology D Series User Manual

On Screen Display Settings & Options
On Screen Display (OSD) Settings & Options
About the On-Screen-Display (OSD) Menus
Various settings and options for the camera, like shooting conditions and system setup, can be changed using the
OSD menu of a connected visual output device or software.
Note: You cannot perform pan/tilt operations while the menu is displayed
D
MAIN MENU
o
To display the main menu, press the MENU button on the supplied infrared remote control, or use Bolin
PTZ controller Joystick.
Flo
EXPOSURE
GAIN: Select a gain value between O and 255.
SPEED (electronic shutter speed): Set the SPEED value from 1/60 to 1/100K.
IRIS : Adjust from CLOSE to F9.6. The gain and shutter speed are set automatically according to the brightness of
the subject. The exposure is adjusted automatically using the values manually set for the IRIS.
WHITE BALANCE
OPW (One Push White Balance) operating steps:
1. Place a white image subject (For example: A piece of white paper) in the center of the screen.
2. Press the HOME button on the infrared remote control to activate the one-push white balance
adjustments.
Note: White Balance data is lost when the power is turned off.
ATW (Auto Tracking White Balance): Auto Tracking White balance, adjust the tone of the camera
according to the temperature (2000K to 10000K) of the light source illuminating the subject.
Navigation:
Use the up and down arrows "↑, ↓" of the IR remote control to select a function, and the
HOME button to enter your selection.
You can also use Bolin 's controller joystick:
o
Push the MENU button.
o
Move the joystick up and down to select a function.
o
Move the joystick left and right to change the setting of a selected function.
Note: The selected function is highlighted in red.
Mode options:
FULL AUTO: Iris, Gain and Shutter Speed are set automatically.
MANUAL: Adjust the GAIN, electronic shutter speed (SPEED), and IRIS manually.
AUTO: This mode computes the white balance value output using color information
from the entire screen (initial setting).
MANUAL MODES: INDOOR: 3200K Base, OUTDOOR: 5800K Base.
OPW (One Push White Balance): Fixed white balance that can be automatically
readjusted by the user (One Push Trigger). The white color reference object should
occupy more than 50% of the camera image to work correctly.
27