Firmware Upgrade; Upgrading Dante Av-H™ Firmware - Bolin Technology D Series User Manual

Firmware Upgrade

Bolin Dante AV-H™ Firmware is based on the operating software for Dante AV-H™ developed by Audinate and has
been optimized for Bolin Dante AV-H™ cameras.
Firmware upgrades to Bolin's Dante AV-H™ cameras are done via IP using Audinate's Dante Firmware Update
Manager software. Please download and install Dante Firmware Update Manager software on your PC:
D
Dante Firmware Update Manager Downloads | Audinate
Upgrading Dante AV-H™ firmware
1. Make sure your PC is connected to the same Dante Network as your Bolin Dante AV-H™ camera(s)
2. Open Dante Firmware Upgrade Manager software on your PC.
1
Flo
3
o
Check the Bolin camera matching your selected firmware and click on Start.
Note: Do not conduct any operations with the camera during the upgrade process. Once the camera is
updated, a pop-up window will come-up with the status of the firmware update. Power cycle the Dante
AV-H camera for the new firmware update to take effect.
Firmware Upgrade
o
Select the network interface used for the primary Dante network and click next .
2
o
Click the Browse button and select the Dante AV-H firmware file for your Bolin
camera. Click next.
4
o
Select Update Dante Firmware.
o
Dante Firmware Update Manager will automatically
look for Dante AV devices that match the firmware
(within 10 seconds or so).
Note: If no device is detected, please disable any
antivirus program and try again.
30
.