Remote Controller - Bolin Technology VCC-8-4K20S-3SMB User Manual

Remote Controller

1. Power

Power ON the camera to turn the camera in
operation status.

Power OFF the camera to turn the camera in standby
status.

When the camera is powered OFF, the camera turns to
the back and would be on standby mode.

When the camera is powered ON, the camera turns to
the front.

Powering the camera ON/OFF would not restart the
camera.
2. Camera ID (Total 3) Selector
3. Preset Position (Total 6) Calling and Setting
4. PAN-TILT

Pan and Tilt direction control

HOME: Home position, Resolution reset
5. L/R Direction Set

Left and right orientation setting
6. ZOOM/FOCUS

Far

Near
7. Auto/Manual Focus
8. Back Light
9. Video Format Switching

You can change the video format by keep
pressing the button – A list of available
resolutions will appear. Use the arrow keys to
navigate, and press the Home button to make a selection. The OSD will show "CHANGING...".
Press the Menu button to exit this menu.
10. MENU

On screen menu display ON/OFF
11. Audio Switch

You can turn the Mic built in the camera Off/ON by pressing the button once.
12. Fast/Slow Zoom Switching
13. White Balance

Change the White Balance setting by pressing the button.
14. De-Flicker

When you find the video flicking, press the button once to eliminate the flickers.
Notes

3V CR2032 Coin lithium Battery is not included with remote controller, you should purchase it at your local market.

3V CR2032 Coin lithium batteries are not interchangeable.
9