2430DAC-HD HDTV Digital to Analog Converter Manual
3.6.
ELECTRICAL
Voltage:
Power:
EMI/RFI:
3.7.
PHYSICAL
Dimensions:
With Mounting Flanges:
Weight:
4.
STATUS LEDS
MODULE FAULT
VIDEO PRESENT:
POWER
5.
USER CONTROLS
The 2430DAC-HD is equipped with an 8 position DIP switch to allow the user to select various output
signals available. The On position is down, or closest to the printed circuit board. . Table 5-1 gives an
overview of the DIP switch functions.
2430DAC-HD - 4
+ 12VDC
6 Watts.
Complies with FCC regulations for class A devices.
Complies with EU EMC directive.
6" L x 3.5" W x 1" H
(152mm L x 89mm W x 25mm H)
6" L x 4" W x 1" H
(152mm L x 114mm W x 25mm H)
0.5 lbs. (0.28 Kg)
This Red LED will be on when input video is lost or there is a fault in the module.
This Green LED will be On when there is a valid HDTV video signal present at the
module input.
This Green LED will be on when there is power applied to the unit. (Located beside
DC power connector)
DIP Switch
Function
1
Video Output signal select
2
3
4
5
Aspect Ratio Marker enable
6
Not used
7
Not used
8
Not used
Table 5-1: DIP Switch Functions
Revision 1.2