Configuring The Deinterlacer - evertz 7700 Manual

7700 MultiFrame Manual
7712HDC HD Broadcast Quality Down Converter
6.5.

CONFIGURING THE DEINTERLACER

The Deinterlacer menus are used to configure parameters associated with the de-interlacer hardware.
The chart below shows the items available in the Deinterlacer menu.
information about each of the menu items.
Deinterlacer Mode
Freeze Frame
Threshold
Noise Reduction
Resolution
Noise Reduction Level
Detail Enhancement
Resolution
Detail Enhancement
Level
Edge Detection
Threshold
H Edge Enhancement
V Edge Enhancement
Motion Detection
Threshold
Interfield Weighting
Factor
7712HDC-22
Selects the whether the module will perform field or frame based down
conversion.
Sets number of frames before frozen video is detected
Sets resolution of the Noise reduction control.
Sets level of the Noise reduction control.
Sets resolution of the Detail Enhancement control.
Sets level of the Detail Enhancement control.
Sets the Edge Detection Threshold used by the Edge Enhancement
controls.
Sets the Horizontal Edge Enhancement control.
Sets the Vertical Edge Enhancement control.
Sets the Motion Detection Threshold used by the Edge Enhancement
controls.
Sets the Interfield Weighting factor used by the de-interlacer.
Revision 1.2
Section 6.5.1 gives detailed