General Notes - Terex R190T Operation And Maintenance Manual

2 SAFETY
2.4 General Safety Notes
• Read and understand all safety signs and operator's manuals prior to opera-
tion.
• If safety signs are obstructed by dirt or debris, clean them using mild soap
and water prior to operation. DO NOT use solvent based cleaners, as they
may damage the safety sign material.
• If safety signs are damaged or illegible, replace them immediately, prior to
operation.
• Never jump off of the machine. Instead use the hand holds and step
designed for entering and exiting the machine. Face the machine and use
three points of contact to ensure your safety.
• Do not use any method of operation, inspection, or maintenance that may
impair safety.
• This machine is only to be used when properly equipped for the task to be
performed and when properly inspected and maintained to ensure safe
operation.
• The manufacturer's instructions regarding operation, inspection, mainte-
nance, repair and transportation must be followed.
• Never place the machine into operation without having first performed a
thorough walk-around inspection and making any necessary repairs or
adjustments.
• Safety devices on the machine shall not be deactivated or removed.
• Do not make any changes, additions or conversions to the machine that
could have a negative effect on safety without the manufacturer's written
approval.
• Any persons in close proximity to the machine during operation should
familiarize themselves with the safety precautions described in this manual
prior to operation.
R160T / R190T US O&M
0404-490 2014-06
14