Fire Prevention - Terex R190T Operation And Maintenance Manual

2 SAFETY

2.10 Fire Prevention

Compact Track loaders have components that operate at high temperatures. It is
important to observe all inspection, operation and maintenance guidelines to min-
imize the possibility of fire.
• Turn the engine off when refueling.
• When refueling or charging the battery, do not smoke or allow open flame
near the machine.
• Always start the engine according to the procedure in the operating
instructions.
• Inspect and clean the radiator/oil cooler, engine compartment, exhaust
system and other areas where there may be hot or rotating parts daily. In
some work environments, flammable debris including but not limited to:
leaves, straw, wood particles (dust), and similar items can accumulate in
these areas and can lead to fire.
• Check the electrical system regularly. Have any faults such as loose
connections, burnt fuses, glow lamps and damaged wiring repaired by
professional personnel immediately.
• Regularly check all lines, hoses and threaded couplings for leaks and
damage. Repair leaks immediately and replace any defective parts. Oil leaks
can easily lead to a fire. NEVER use bare hands to check for hydraulic
leaks! Pressurized fluid (oil) can penetrate skin and cause gangrene. If
injection occurs, seek medical attention immediately!
• Do not use any starting aids containing ether to start diesel engines with
pre-heat systems! Use of starting aids of this nature can cause an
EXPLOSION!
• Familiarize yourself with the location of any fire extinguishers in/on the
machine and how to use them as well as local options for reporting and
fighting fires should one occur.
Fuel Handling Precautions
• Do not smoke or allow open flame near fueling operations.
• Always maintain control of the fuel filter nozzle when filling the tank.
• Do not fill the fuel tank to capacity, allow room for expansion.
• Clean up fuel spills immediately.
• Tighten the fuel tank cap securely. Should the cap become lost or damaged,
replace it immediately with the original manufacturer's recommended
replacement cap to ensure proper venting and function.
• Never use fuel for cleaning purposes.
• Always use the correct fuel grade for the operating season.
R160T / R190T US O&M
0404-490 2014-06
18