Replacing The Mains Cable - Fronius TransTig 170 Service Manual

Replacing the mains cable

Replacing the Removing the mains cable:
mains cable
28
(1)
(1)
Open housing as described in chapter
1
"Opening the housing".
Remove cable ties (1).
2
Remove the TX20 M4x8 screw (2).
3
(1)
(2)
Turn it to the back.
4
Remove ferrite ring (1) from the ground
wire.
Remove 2 M5x18 TX25 screws (1).
5
Pull out the mains cable.
6