Opening The Housing - Fronius TransTig 170 Service Manual

Opening the Housing

Opening the
housing
Risk of death due to contact with live components when the device is open!
An electric shock will cause serious injury or death.
► If the device is switched on with the housing open, do not touch the components inside
► Use only suitable measuring probes or test probes.
18
DANGER!
the housing.
(1) (2)
Remove 2 5x18 TX25 screws (1) on
1
the control panel.
Fold the control panel (2) to the side.
2
(1)
Remove 4 5x18 TX25 screws (3) on
3
the front of the device and remove the
housing feet.
(3)
(3)