Quick Setup Wizard; Fax Setup Items - Kyocera TASKalfa 6053ci Hardware Installation And Reference Manual

Before Using the Fax Machine > Quick Setup Wizard

Quick Setup Wizard

In quick setup mode, a wizard is used to configure the following settings. Be sure to complete the settings before using
the fax system.

Fax setup items

Step
1.Dialing/RX Dialing Mode(Port 1)
Mode Dialing Mode(Port
*1*2
2)
Reception Mode
Auto (DRD)
2.Local Fax Local FAX Name(Port
Information 1)
Local FAX Name(Port
*2
2)
Local FAX Number(Port
1)
Local FAX Number(Port
*2
2)
Local FAX ID
TTI
3.Sound FAX Speaker Volume
FAX Monitor Volume
Job Finish Buzzer
4.Rings Rings(Normal)
Rings(FAX/TEL)
Rings(TAD)
Setting item
*1
Select the dialing mode according to the line type.
Select the reception mode.
*3
Select the reception pattern.
Register the local fax name printed on the fax on the
receiving system.
Enter the local fax number to be printed on the fax on
the receiving system.
Enter the local fax ID. The local fax ID can limit other
parties with which you can communicate. Enter the four-
digit local FAX ID number.
Select whether or not to print the local fax information on
the fax on the receiving system.
Set the volume when selecting [On Hook].
Speaker Volume: Volume of the built-in speaker when
the line is connected by selecting [On Hook].
Set the monitor volume.
Monitor Volume: Volume of the built-in speaker when the
line is connected without selecting [On Hook] such as in
memory transmission.
Emit a sound when a print job is normally completed.
*4
Set number of times to let phone ring before answering
a call.
*4
Set number of times to let phone ring before taking over
from the answering machine.
*4
Set number of times to let phone ring before switching
the FAX and the phone.
Description
2-12
Reference
Page
8-10
8-10
8-12
8-12
8-9
8-9
8-10
8-10
8-10
8-9
8-6
8-6
8-6
8-12
8-12
8-12