Kyocera TASKalfa 6053ci Hardware Installation And Reference Manual page 122

Using Convenient Fax Functions > Polling Communication
Using Polling Transmission
1
2
3
4
[FAX Box] on the Home screen > [Polling Box]
Place the originals.
Display the screen.
Select [Store File].
Select the type of originals, scanning density, etc., as necessary.
The table below lists the items to be set.
Function
Original Image
*1
Mixed Sized Originals
*2
2-sided/Book Original
Original Orientation
Storing Size
Density
Original Image
Scan Resolution
Zoom
Centering
Border Erase/Full Scan
Continuous Scan
Job Finish Notice
Select image quality.
Allows you to use the document processor to load
and store multiple originals of different sizes.
Select the type and binding of originals.
To ensure that the originals are stored in the correct
orientation, this indicates the orientation of the
original document top edge. To use the following
functions, select the orientation of the originals.
• 1-sided / 2-sided Selection
• Border Erase/Full Scan
Selects the storage size (the size of stored originals).
Adjusts the density used for scanning originals.
Select the image quality according to the original
image type.
Chooses the level of detail used for scanning
originals.
Automatically enlarges or reduces scanned originals
to match the storage size.
When you have scanned the original after specifying
the original size and sending size, depending on
these sizes, a margin is created at the bottom, left, or
right side of paper. By using the centering, the image
is placed with a margin equally created at each of the
page Top/Bottom and Left/Right.
Scans originals with the black frame around the
outside of the originals erased.
Allows you to divide originals that cannot be placed
in the document processor at one time into multiple
scans and then store the result as a single file. With
this function, originals continue to be scanned until
you select [Finish Scan].
Sends a notice by an e-mail when a scanning is
complete.
5-30
Description