Kyocera TASKalfa 6053ci Hardware Installation And Reference Manual page 225

Internet Faxing (i-FAX) > i-FAX Settings
i-FAX Settings POP3
*1 When Internet FAX is used, this must always be set.
Item
Check Interval
Run once now
Domain Restriction
POP3 User Settings
E-mail Address
POP3 Server
*1
Name
POP3 Port
Number
POP3 Server
Timeout
Login User
*1
Name
Login
Password
Use APOP
Connection Test
E-mail Size Limit
Cover Page
Displays the interval, in minutes, for connecting to
the POP3 server to check for incoming e-mails at
specific interval. Specify the interval in the range
from 3 minutes to 60 minutes. The default is 15
minutes.
Click [Receive] to immediately connect to the POP3
server and check for incoming E-mail.
Activate or deactivate to restrict domains. Click the
[Domain List] button to configure. Enter a domain
name that is permitted or rejected. You can also
specify the
E-mail addresses.
―
*1
Enter the i-FAX address (E-mail address). You can
enter up to 64 characters.
If you enter the server name, you must specify the IP
address of the DNS server. You can enter the DNS
server IP address in the TCP/IP settings screen.
Machine's Operation Guide
Sets the port number used by POP3. Normally, 110 is
used.
Enter the timeout period in seconds.
Enter the login name for the user account. You can
enter up to 64 characters.
Enter the password for the user account. You can
*1
enter up to 64 characters.
Specify whether to use APOP authentication. To use
APOP authentication, select [On] in this setting.
Runs a test to determine whether the settings
specified in this page are correct.
Enter the maximum size for E-mails that can be
received in kilobytes. You can set up to 32,767
kilobytes. If 0 is entered, the setting does not limit the
maximum size.
Specify whether the E-mail messages are also
printed. Select [On] to print faxes with a cover page
attached. If the E-mail message includes text, the
text is printed on the cover page.
10-8
Description