Before Using the Fax Machine > Quick Setup Wizard (Fax Setup)
Quick Setup Wizard (Fax Setup)
In quick setup mode, a wizard is used to configure the following settings. Be sure to complete the settings before using
the fax system.
Fax setup items
Step
1.Dialing/RX Mode
Dialing Mode
Reception Mode
Auto (DRD)
2.Local Fax Info.
Local FAX Name
Local FAX Number
Local FAX ID
Print Position (Transmit
Terminal Identification:
TTI)
3.Sound Volume
Speaker Volume
Monitor Volume
Job Finish
4.Rings
Normal
Answering Machine
FAX/TEL Switch
5.Redial
Retry Times
*
DRD reception mode is available for some countries.
**
For FAX/TEL Switch, this change is possible with some countries.
NOTE
The settings can be changed in the system menu. Refer to Default fax settings on page 9-2 or the Operation Guide for
the machine.
Setting item
Select the dialing mode according to the line type.
Select the reception mode.
*
Select the reception pattern.
Register the local fax name printed on the fax on the
receiving system.
Enter the local fax number to be printed on the fax on
the receiving system.
Enter the local fax ID. The local fax ID can limit other
parties with which you can communicate. Enter the
four-digit local FAX ID number.
Select whether or not to print the local fax information
on the fax on the receiving system.
Set the volume when pressing [On Hook].
Speaker Volume: Volume of the built-in speaker when
the line is connected by pressing [On Hook].
Set the monitor volume.
Monitor Volume: Volume of the built-in speaker when
the line is connected without pressing [On Hook] such
as in memory transmission.
Sets whether an audible signal is generated when a job
is successfully completed.
Set number of times to let phone ring before answering
a call.
Set number of times to let phone ring before taking over
from the answering machine.
**
Set number of times to let phone ring before switching
the FAX and the phone.
Set the number of redials.
Description
1-7
Reference
Page
9-7
9-8
9-8
9-7
9-7
9-7
9-7
9-6
9-6
9-6
9-8
9-8
9-8
9-7
Need help?
Do you have a question about the TASKalfa 266ci and is the answer not in the manual?
Questions and answers