Fax Exclusive Paper Source; Multipurpose Tray; Reduced Rx Size - Kyocera TASKalfa 6053ci Hardware Installation And Reference Manual

Receiving Faxes > FAX Exclusive Paper Source

FAX Exclusive Paper Source

Set fax exclusive paper cassettes.

Multipurpose Tray

You can select whether to use the MP tray paper when printing out the received fax.

Reduced RX Size

When the reception size is larger than the paper size, you can reduce the print size.
Selectable paper source
NOTE
Cannot select the cassettes below.
• Paper Size is set to other than Auto.
• Media Type is set to Preprinted, Prepunched, Letterhead.
For FAX related reports, paper is fed from the cassette set as the FAX exclusive paper
source.
For more information about configuring settings, refer to the following:
FAX Exclusive Paper Source (page 8-11)
On
Off
For more information about configuring settings, refer to the following:
Multipurpose Tray (page 8-11)
On
Off
For more information about configuring settings, refer to the following:
Reduced RX Size (page 8-11)
Cassette 1 to 5
Use the MP tray paper.
Do not use the MP tray paper.
Print the received data at 100% of the original size by dividing it
into several sheets of paper.
Print the received data by reducing the original size according to
the paper size.
4-7