Changing The Control Panel Settings; Setting The Installer Details - REMEHA Gas 210 Ace 80 Service Manual

High-efficiency standing gas boiler
Hide thumbs Also See for Gas 210 Ace 80:
Table of Contents

Advertisement

4 Installer instructions
Tab.11
Icon
Zone or function
Internal DHW
CIRCA / CH
Auto filling CH
Commercial boiler
Gas fired appliance
Shower time function
Tab.12
Configuring a zone or function of CU-GH08 or SCB-02
Parameters, counters, signals
Parameters
Counters
Signals
4.5.1

Changing the control panel settings

Tab.13
Control panel settings
System Settings menu
Set Date and Time
Select Country and Language
Daylight Saving Time
Installer Details
Set Heating Activity Names
Set Screen Brightness
Set click sound
License Information
4.5.2

Setting the installer details

14
Description
Domestic hot water produced by boiler
Central heating circuit
Adjust or start the automatic filling unit
Gas boiler
Gas boiler
Activate the shower time function
Description
Set the parameters at installer level
Read the counters at installer level
Read the signals at installer level
You can change the control panel settings within system settings.
> System Settings
Use the rotary knob to navigate.
Use the
1. Press the
button.
2. Select System Settings
3. Perform one of the operations described in the table below:
Settings
Set the current date and time
Select your country and language
Enable or disable daylight saving time. When enabled daylight saving time will
update the systems internal time to correspond with summer and winter time.
Read out the name and phone number of the installer
Create the names for the activities of the timer program
Adjust the brightness of the screen
Enable or disable the click sound of the rotary knob
Read out detailed license information from the appliance
You can store your name and phone number in the control panel to be
read by the user. When an error occurs these contact details will be
displayed.
> System Settings > Installer Details
Use the rotary knob to navigate.
Use the
1. Press the
button.
Enable installer access if it is not enabled.
1.1. Select Enable installer access.
1.2. Use code 0012.
2. Select System Settings
button to confirm your selection.
.
button to confirm your selection.
.
7837115 - v.01 - 10012023

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gas 210 ace 120Gas 210 ace 160Gas 210 ace 200

Table of Contents