Manifold - Air Lift 27691 Instruction Manual

MANIFOLD

BEST PRACTICE IS TO LOCATE THE MANIFOLD UNIT INSIDE THE VEHICLE. IF
CAUTION
EXTERNAL MOUNTING IS DESIRED, THE MANIFOLD SHOULD BE LOCATED IN AN
AREA SHIELDED FROM DIRECT WATER SPRAY FROM TIRES OR CAR WASHES.
1. Position the manifold in a desired location. Make sure the manifold mounting surface
NOTE
When mounting the manifold , do so either horizontally or vertically, with ports and connector
facing toward the ground. Do not mount the manifold upside down. Proper manifold mounting
will help prevent water from settling in areas sensitive to freezing (fig. 12).
2. Fasten the manifold using the supplied hardware. If the mounting surface is not flat,
3. A manifold mounting template can be found on page 27.
10
is flat.
IDEAL
ACCEPTABLE
UNACCEPTABLE
add washers or a spacer to lift the manifold up over surface irregularities (fig. 13). In
addition to the provided self-tapping screws, the manifold mounting holes are threaded
and can be secured with 5/16-18 bolts (also supplied).
Installation Manual
UP
MANIFOLD
ROTATION/
ORIENTATION
DOWN
fig. 12
fig. 13
MN-946