Air Lift Wireless AIR EZ Mount 74000EZ Manual

Introduction
WirelessAIR™ EZ Mount™ combines a manifold and compressor into a single,
easy-to-install unit, along with wiring harness and accessories needed to connect to
vehicle power and air springs (purchased separately).
It is important to read and understand the entire installation guide before beginning
installation or performing any maintenance, service or repair. The information here
includes a hardware list, step-by-step installation information and safety information.
USING THE SYSTEM
Refer to the WirelessAIR User Guide included with this kit to learn how to operate the
system.
NOTATION EXPLANATION
Hazard notations highlight information that must be observed to help minimize risk of
personal injury or possible improper installation, which may render the vehicle unsafe.
INDICATES IMMEDIATE HAZARDS WHICH WILL RESULT IN SEVERE PERSONAL
DANGER
INJURY OR DEATH.
INDICATES HAZARDS OR UNSAFE PRACTICES WHICH COULD RESULT IN SEVERE
WARNING
PERSONAL INJURY OR DEATH.
INDICATES HAZARDS OR UNSAFE PRACTICES WHICH COULD RESULT IN DAMAGE
CAUTION
TO THE MACHINE OR MINOR PERSONAL INJURY.
TOOLS LIST
Description ......................................................... Qty
Power drill ..................................................................... 1
3/8" Drill bits ........................................................... 1 ea.
3/8", 1/2", 5/16", 9/16" Sockets and ratchet ......... 1 ea.
Wire stripping/crimping tool ......................................... 1
Sharp razor knife .......................................................... 1
MN-1100 • (011910) • ERN 8774
Manifold
Kit Number
74000EZ
EZ Mount Compressor System
Compressor