Advertisement
Thank you for purchasing Air Lift Products
Mailing Address:
AIR LIFT COMPANY
P.O. Box 80167
Lansing, MI 48908-0167
For Technical Assistance call 1-800-248-0892
"The Choice of the Professional Installer"
Street Address:
AIR LIFT COMPANY
2727 Snow Rd.
Lansing, MI 48917
Local Phone: (517) 322-2144
Fax: (517) 322-0240
Please read these instructions completely
before proceeding with installation
Failure to read these instructions can result in mis-installation
The purpose of the expansion tank kit is to provide a smoother ride
by acting as an add-on volume for the air springs. When the air
spring system is faced with rough road conditions, pressure builds in
the air springs. Under these conditions, the expansion tank gives
the air in the air springs somewhere else to go and decreases the
pressure and the spring rate.
While adding the expansion tank kit will improve the ride of your
vehicle, it will not affect RoadTamer's carrying capacity. Do not
exceed the GVWR rating for your vehicle.
Installing the Expansion Tank Kit
*Kit Installation Diagram ....................................... 1
Assembling And Installing The Air Tank ................... 2
Attaching The Air Lines .......................................... 2
MN-603
(02502)
NPR 5019
by
Advertisement
Table of Contents
Related Manuals for Air Lift RoadTamer 25325
Summary of Contents for Air Lift RoadTamer 25325
- Page 1 Installing the Expansion Tank Kit *Kit Installation Diagram ........1 Assembling and Installing the Air Tank ....2 Attaching the Air Lines .......... 2 Thank you for purchasing Air Lift Products Mailing Address: Street Address: AIR LIFT COMPANY AIR LIFT COMPANY P.O.
- Page 2 Kit Diagram Assembling and Installing the Air Tank IMPORTANT NOTE: Depending on the orienta- 3. Attach the swivel elbow fitting to the port on the To Air Source tion of the tank once it is mounted, the fittings may expansion tank that will be facing upwards once the go into different ports on the tank.
Need help?
Do you have a question about the RoadTamer 25325 and is the answer not in the manual?
Questions and answers