SPIRIT BDC: MODEL 2570/2571
SHOWN: Model 2570 Spirit BDC
with Cabinet
GLIDE FOOT INSTALLATION
1. Place chair on side and install four (4) Glide Feet in threaded holes on the bottom of the Chair Frame (FIG.
1 & 2).
FIG. 1
x4
2. Lift and position the chair to the upright position, with Glide Feet on a level floor.
3. If the Chair Frame does not sit level on the floor, loosen select Glide Feet individually as needed to achieve
stable, level positioning of the chair.
4. Continue adjusting until the Chair Frame is level and stable.
Page 8 of 30
manual
Document No.: 006020 - Revision: R
SHOWN: Model 2571 Spirit BDC
with Standard Arm
FIG. 2
x4