Related Manuals for Champion Elevate
Summary of Contents for Champion Elevate
- Page 1 Operating Instructions and Service Manual “ELEVATE” 1-800-998-5018 www.championchair.com...
-
Page 2: Table Of Contents
CONTENTS ITEM PAGE Contents In-Service Information Special notes Chair capacity information Receiving new chairs 6-10 New chair inspection New chair assembly Attaching the upholstery To report damage Return authorization Storage In-service procedures Operating instructions 11-18 Safe operation of the chair 11-13 Caster brakes Arm rest adjustment... -
Page 3: In-Service Information
In-Service Information It is very important to Champion that our customers review all the materials in the in-service package they receive. By reviewing the in-service materials provided, you increase the useful life of the products by helping to prevent their improper use, which may lead to premature damage and wear. You are also helping to validate your warranty, as warranties cover material and workmanship failures, not misuse or abuse. -
Page 4: Special Notes
WELCOME! Champion Manufacturing Inc. would like to thank you for selecting our products. We take great care in making certain that our products leave the factory in flawless condition. Our products are properly packaged to arrive in that same condition. - Page 5 Equipotential connector (*) Measuring earth point Protecting network Please do not sit to the leg rest Do not drive onto the mains cable Do not drive onto the handset cable WARNING: This recliner is designed to meet the needs of a wide range of patients. Some patients, due to their unique medical condition, may need assistance as they sit down or rise from a seated position.
-
Page 6: Chair Capacity Information
CHAIR CAPACITY INFORMATION ELV8: Maximum patient weight: 200 kg (440 lbs) OM00ELV8 Rev 3 effective 110118... -
Page 7: Receiving New Chairs
RECEIVING NEW CHAIRS CAUTION: New chair inspection must be done by someone who has read and understands the instruction pages. Improper operation of the chair may damage the chair and void your warranty. CAUTION: Before plugging chair into wall outlet, it should be checked for condensation on the electrical components and dried if necessary. -
Page 8: New Chair Assembly
New chair assembly 1. Verify the handset connection plug is appropriately inserted into the receptacle suitable on the electronic box found under the seat. (Figure 1) Power cable Battery unit connector (*) Motor connectors (*) Closing plug OR (In case of no Battery unit (In case of less motors Emergency stop end cap must be... -
Page 9: Attaching The Upholstery
Attaching the upholstery: 1. Using the handset, adjust the chair so the leg rest is in line with the seat plate and the backrest is vertical (Figure 2). This is the easiest position in which to attach the upholstery. Pull the two straps on the back of the upholstery onto the frame (Figure 3, Figure 4). Figure 3 Figure 2 Figure 4... - Page 10 4. Attach the headrest pillow to the backrest by inserting the leather strip through the guide (Figure 6). 5. Secure the armrest strap included in the accessories to the armrest. The armrest strap is used to position the remote control handset. Figure 6 Check whether the mains or the handset cable is not stretched or ends up under the wheels or another object while operating the chair.
-
Page 11: To Report Damage
2. Call Champion’s customer service immediately to report the damage: 800-998-5018. 3. All claims must be filed by the consignee and reported to Champion Manufacturing Inc. within 5 days of receipt of the shipment. -
Page 12: In-Service Procedures
Before chairs are put into service, all personnel should review this manual. In the belief that an actual demonstration of the product is more effective than written instructions, an on-site in-service by a Champion representative may be available depending upon the delivery circumstances. - Page 13 The below picture makes the installation instructions evident: Figure 25 Expected safe operational environment Please keep the prescribed safety distances around the chair in order to avoid any damages of the frame! Do not use the chair for patient transfer! The Manufacturer shall not take responsibility for any consequences of misplacement and abnormal use.
- Page 14 The chair should not be entered or exited over the legrest, because stepping on the legrest ● can cause the chair to tip over or be damaged. ● Do not sit onto the backrest when it is folded back, because the chair can tip over. ●...
-
Page 15: Caster Brakes
OPERATING INSTRUCTIONS Caster Brakes Always set the caster brakes before allowing your patient to get in or out of the chair. Release the caster brakes only when the chair is being relocated; and reset the caster brakes upon arriving at your destination. -
Page 16: Arm Rest Adjustment
OPERATING INSTRUCTIONS Use of the remote control handset The adjustment of the chair is done by using the handset (Figure 10). The chair moves only as long as a button of the handset is depressed. The control of the chair makes it possible that more than one motor is active at any time. -
Page 17: Handset
OPERATING INSTRUCTIONS ENTRY/LEAVE BED position ENTRY / LEAVE position LED indicates button pressing Backrest up Backrest down Seat tilt up Seat tilt down Legrest up Legrest down Seat height down Seat height up LED indicates battery charging (*) Power on (*) Head-down position Figure 9 Remote control handset... -
Page 18: Trendelenburg Foot Switches
OPERATING INSTRUCTIONS Trendelenburg foot-switches Independently of the handset the Trendelenburg foot-switches can be used to place the chair into the Trendelenburg position (Figure 10). Trendelenburg foot-switches on both sides of underframe allows hands-free operation for the staff in case of emergency situations and also prevents unintended misuse by the patient. -
Page 19: Battery Unit
OPERATING INSTRUCTIONS Battery unit The chair is equipped with a Battery unit to ensure the operation of chair during power failure assuring the patient’s comfort. In this case the handset operates, • the Trendelenburg foot-switches on the bottom frame operate from battery, •... -
Page 20: Optional Chair Accessories
OPTIONAL(*) CHAIR ACCESSORIES Accessories are features that may be ordered for your Champion chairs at any time. Some installation may be required. Accessories can be installed in the factory or in the field by the facility. Comfort-T2 Multifunctional table It can be mounted on either side of the chair (Figure 13). -
Page 21: Push Bar
OPTIONAL(*) CHAIR ACCESSORIES Push bar Allows for easy repositioning of the chair (Figure 15). Figure 15 Push bar Universal holder for tablets and smartphones The chair can be equipped with a universal mobile phone and tablet holder for smart devices from 4”... -
Page 22: Usb Charging Unit For Smart Devices
OPTIONAL (*) CHAIR ACCESSORIES USB charging unit for smart devices (*) The chair can be equipped with an USB charging unit to charge Patient’s mobile phone or tablet. It can be installed onto both sides of chair. (Figure 17). protecting plug Figure 17 USB charging socket Note: If the USB charger socket is out of use please insert the... -
Page 23: General Maintenance And Care Of Chairs
If you have any questions, please call Champion’s Customer Service Department at 800-998-5018 with the serial number from your chair. The serial number can be found on the frame base, on the back, to the left hand side. -
Page 24: General Cleaning
GENERAL CLEANING First clean on a daily basis the upholstery with warm water and mild soap using damp cloth. Regular and careful cleaning of the upholstery with water in addition to a mild soap can prevent hardening and embrittlement of the upholstered parts from such materials as detergent, sweat, skin oils, hair spray, hand creams and similar things may affect the leather during treatment. -
Page 25: General Disinfecting/Infection Control - Vinyl
If you are using disinfection agents other than bleach and water; do not hesitate to call Champion’s Customer Service for assistance in determining whether there may be any concerns about that agent and the vinyl that you have chosen. -
Page 26: Safety Inspection & Troubleshooting
SAFETY INSPECTION AND TROUBLESHOOTING Routine Safety Inspection The following inspections and maintenance work should be done in every two years with the Technical Safety Inspection. • The hinges and joints of the leg rest, backrest and armrest should be inspected. •... -
Page 27: Warranty Procedure
Warranty Coverage Your coverage is per the Champion warranty. A copy of the current warranty was provided with this manual for your convenience. Please read this document. Warranty Does Not Apply If: ●... -
Page 28: Service Information
This number is required to process your request. The serial number is located in the back of the chair on the lower left side on the label entitled Champion Manufacturing -Serial #xxxxxx. No parts will be shipped without a Serial Number to which they will be installed. -
Page 29: Service Parts Form
SERVICE PARTS FORM Champion Manufacturing 2601 Industrial Parkway, Elkhart, IN 46514 Tel.: –800-998-5018 Fax: –574-293-5760 Customer name: _________________________________________ Customer address: ________________________________________ Tel: _________________ Fax: __________________ Ordering spare parts for Serial Number _______________________ Pieces Art.-Nr. Description E8-ARMHAS Armrest height adjusting stirrup... -
Page 30: Service Parts
SERVICE PARTS Figure Art.-No. Description Figure Art.-No. Description Electronic parts Electronic control box without Battery unit reading lamp E8-BATTERY E8-ELECCBX connector Foil of the Power cable E8-FOIL handset E8-PWRCBL (Nema 5-15) Handset E8-HNDST Motors Backrest Seat tilt motor E8-BKRSTMTR E8-SEATTMTR motor Leg rest Seat height...