Tools Required - Champion Phlebotomy Sprit BDC Owner's Operating And Maintenance Manual

TOOLS REQUIRED

MODELS 2570, 2571, 2572, 2573, 2574 AND 2575
• Multiple size wrench included (or suitable 5/ 1 6, 3/ 8 " & 7/ 1 6" or adjustable wrenches)
• Phillips-head screwdriver
• Scissors or box cutter
• Powered tools not recommended
PREPARATION: BEFORE YOU BEGIN
1. Carefully examine your product for any damage. Be sure to inspect all components.
IF DAMAGE IS EVIDENT, CONTACT FREIGHT CARRIER OR CHAMPION IMMEDIATELY.
2. Remove all packaging material and any hardware that was secured for shipping.
3. Carefully remove all components and any included tools and/or parts from the carton.
4. You may need to cut packaging materials with a box cutter or scissors to access the product. Use CAUTION
to avoid personal injury or damage to the product.
5. Save all boxes and packaging material until AFTER you have assembled your product and have verified that
all components are functioning properly. These material are required if it becomes necessary to return the
product.
6. DO NOT install, maintain or operate this equipment without reading and following this manual otherwise
injury and/or damage may result. IF YOU HAVE QUESTIONS OR CONCERNS PLEASE CONTACT Champion
Manufacturing, Inc .
CHAMPION ASSUMES NO RESPONSIBILITY FOR DAMAGE OR INJURY CAUSED BY IMPROPER ASSEMBLY,
Page 7 of 30
manual
Document No.: 006020 - Revision: R
INSTALLATION, USE, OR MAINTENANCE OF THESE PRODUCTS.