Unity Bdc: Model 2574/2575; Glide Foot Installation - Champion Phlebotomy Sprit BDC Owner's Operating And Maintenance Manual

UNITY BDC: MODEL 2574/2575

SHOWN: Model 2574 Unity BDC with
Cabinet

GLIDE FOOT INSTALLATION

1. Place chair on side and install four (4) Glide Feet in threaded holes on the bottom of the Chair Frame (FIG.
1 & 2).
FIG. 1
x4
2. Lift and position the chair to the upright position, with Glide Feet on a level floor.
3. If the Chair Frame does not sit level on the floor, loosen select Glide Feet individually as needed to achieve
stable, level positioning of the chair.
4. Continue adjusting until the Chair Frame is level and stable.
Page 22 of 30
manual
Document No.: 006020 - Revision: R
SHOWN: Model 2575 Unity BDC
with Standard Arm
FIG. 2
x4