Table of Contents
Advertisement
CABINET ASSEMBLY AND INSTALLATION
* MODEL 2572
1. Remove the cabinet from the frame (FIG. 1). Use CAUTION to avoid personal injury or damaging the
product.
FIG. 1
2. Remove packaging materials from cabinet assembly.
3. The cabinet installs on the PATIENT LEFT side of chair (FIG. 2). Insert the cabinet assembly into the receiving
tube. ALWAYS make sure that the slot in the Arm Assembly faces the knob installed on the receiving tube
(FIG. 2).
FIG. 2
4. Adjust the Cabinet to the desired height and tighten knob.
5. Cabinet installation is complete (FIG. 3). Be sure to tighten the BLACK KNOB to secure the cabinet even if
no height adjustment is made. This will ensure cabinet is secure for use.
FIG. 3
Page 19 of 30
manual
Document No.: 006020 - Revision: R
Advertisement
Table of Contents
