Important Safety Information; General Care & Cleaning - Champion Phlebotomy Sprit BDC Owner's Operating And Maintenance Manual

GENERAL CARE & CLEANING
• Periodically inspect tightness of all screws, bolts, nuts, or other fasteners.
Champion Manufacturing, Inc's full-line of products are built to provide durability and reliability when properly
cared for. In general all of our products should be:
1. Cleaned
2. Disinfected (per facility policy)
3. Rinsed
4. Allowed to air dry
It is important to note that disinfecting a product is not the same as cleaning the product. Disinfectants alone
will not provide adequate cleaning, they do not have grease or oil cutting properties to remove grime or hair and
skin oils. Over time, the appearance and feel and performance of your upholstery may diminish if not cleaned
properly.
CLEANING
Remove grime, hair and body oils; Your furnishings should be cleaned with mild soap & water solution and
a damp cloth on a regular basis (especially where skin & hair make contact with upholstery). Avoid harsh
detergents or chemicals that could damage the upholstery or finish of your chair. If the furnishing's upholstery
is disinfected with chemicals or bleach mixtures, the chair MUST be wiped off using only clean water on a damp
cloth and then be allowed to air dry. Failure to rinse upholstery with clean water can result in a build-up of
residues over time that can dry out the upholstery and cause changes to the look and feel of the upholstery and
eventually can lead to cracking.
Please refer to any instruction labels or tags that may have been included with your product for complete care
and cleaning instructions. Retain information on the label or tag for future use.
For additional cleaning information, please visit www.championchair.com/cleaning-instructions/
For Custom Vinyl, please refer to the manufacturer's instructions.
Page 6 of 30
manual
Document No.: 006020 - Revision: R