Arm Installation For 506 Model Only; Operation Of Task Chair - Champion 505 Owner's Operating And Maintenance Manual

ARM INSTALLATION FOR 506 MODEL ONLY

7. Remove the Arm Support Adjustment Knob and Hardware from the
Adjustable Armrest.
8. Slide the Adjustable Armrest into the Armrest Bracket located under
each side of the Upholstered Seat. Secure the Adjustable Armrest by
installing the Arm Support Adjustment Knob and Hardware through
the slot in the Adjustable Armrest and into the threaded holes of the
mounting plate (Fig. 8).
NOTE: The longer part of the arm should be closest to the front of
the chair (Fig. 9).
9. Repeat for opposite side.
ARM INSTALLATION IS COMPLETE.

OPERATION OF TASK CHAIR

1. The chair is now ready for use. To raise the seating height, lift Release
Handle without weight on seat.
2. To lower seating height, Lift the Release Handle while sitting on the seat;
Release the handle when desired height is reached.
3. Position the Adjustable Armrest to desired height by pulling up on the
Arm Height Release Lever and moving the Adjustable Armrest up or
down. Release the lever to lock armrest in place.
WARNING
Page 6 of 13
manual
Document No.: 006350 - Revision: A
Periodically recheck tightness of all fasteners,
and never stand on the Upholstered Seat.
FIG. 8
FIG. 9