Seat Installation - Champion Phlebotomy Sprit BDC Owner's Operating And Maintenance Manual

SEAT INSTALLATION

WARNING
1. Position Chair Frame in upright position. Check tightness of all installed screws, bolts, nuts and other
fasteners in case they loosened during shipping.
2. Align the screws on bottom of the Seat Assembly, with the Seat Support holes. (Hole spacing of Seat
Supports will be narrower toward front of Chair). Seat can only be properly installed facing one direction. Be
sure that all four (4) Seat Screws go completely through the Seat Support straps on chair frame (FIG.
1).
3. Install four (4) lock nuts to the screws on the Seat Assembly and completely tighten with 7/ 1 6" wrench (FIG.
1).
Page 16 of 30
manual
Document No.: 006020 - Revision: R
Failure to completely tighten the seat mounting screws COULD RESULT IN SERIOUS
INJURY.
FIG. 1