Table of Contents
Advertisement
REMOVING AND RE-INSTALLING CABINET DRAWER
* MODEL 2570
1. To remove drawer, open drawer until the drawer stops. Using your finger, locate the drawer stop tab
mounted to the bottom of the drawer top. Press the tab against the drawer top and slide the drawer past the
tab (FIG. 1).
2. To reinstall the drawer, insert the rear part of the drawer past the drawer stop, then slide the drawer into the
frame (FIG. 2). Bin dividers can be installed into the grooves as needed (FIG. 2).
FIG. 2
Page 13 of 30
manual
Document No.: 006020 - Revision: R
FIG. 1
Advertisement
Table of Contents
