Urethane Flip-Up Arm Level Adjustments - Champion Phlebotomy Sprit BDC Owner's Operating And Maintenance Manual

URETHANE FLIP-UP ARM LEVEL ADJUSTMENTS

Use a ⅛" Hex Key to make minor leveling adjustments to the Urethane Flip-Up Armrest as needed.
1. Rest the Hinge Plate flat on the Hinge Arm Support Bracket.
2. Insert the ⅛" Hex Key into the underlying access hole as shown and turn the screw located inside clockwise
until the screw is firmly pressed against the Arm's Hinge Plate (FIG. 1).
FIG. 1
Page 11 of 30
manual
Document No.: 006020 - Revision: R