Urethane Flip-Up Arm Level Adjustments - Champion Phlebotomy Sprit BDC Owner's Operating And Maintenance Manual

URETHANE FLIP-UP ARM LEVEL ADJUSTMENTS

Use a ⅛" Hex Key to make minor leveling adjustments to the Urethane Flip-Up Armrest as needed.
1. Rest the Hinge Plate flat on the Hinge Arm Support Bracket.
2. Insert the ⅛" Hex Key into the underlying access hole as shown and turn the screw located inside clockwise
until the screw is firmly pressed against the Arm's Hinge Plate (FIG. 1).
Page 25 of 30
manual
Document No.: 006020 - Revision: R