Advertisement
Prepare for installation cont...
( ) I
Secure the two D-rings (Item 33 received with SSDS201) to the inside of the vehicle's load bay. You will be
bolting through the two 6.5 mm holes drilled in Step 2H using two M6 x 25 Hex Bolts, four M6 x 19 Flat
Washers, two M10 x 50 Flat Washers and a two M6 Nyloc Nuts (Items 32, 34, 35, 36 received with SSDS201)
as shown.
Install Drawer System
(
)
Lift the Drawer System (Item 1) into the vehicle's load
A
bay and position it 55 mm in from the front of the load
bay and center it from left to right.
REV_A02
Load Bay
Tail Gate
7
55 mm
Advertisement
