Front Runner SSDS126 Installation Instructions

Ford ranger raptor (2019-current) w/drop-in bed liner deck completion set

Advertisement

front runner
Thank you for purchasing a Front Runner Ford Raptor (2019 - Current) w/Drop-In Bed Liner Deck Completion Set.
Before you start, take a moment to familiarize yourself with the Fitting Instructions and the components received.
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD
RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT
RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND
DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO
INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY
FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
SSDS126_REV_A01
FORD RANGER RAPTOR (2019-CURRENT)
W/DROP-IN BED LINER DECK COMPLETION SET
READ ME !
Refer to Page 2 for a list of all the components, quantities and tools required.
IMPORTANT WARNING!
Please call us if you have any questions about the installation of this product.
1
SSDS126
© 2021 FRONT RUNNER VEHICLE OUTFITTERS
ENG

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SSDS126 and is the answer not in the manual?

Questions and answers

Summary of Contents for Front Runner SSDS126

  • Page 1 FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL. NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
  • Page 2 Face Plate / Narrow LHS Face Plate / Narrow RHS Carb03 Finishing Washer M6 M6 x 30 CSK Socket Screw M6 x 16 Button head M6 Nyloc Nut M6 Nut Cap FIGURE 1.1 SSDS126_REV_A01 © 2021 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 3 Two on the right and two on the left hand side. 10mm Secure the Rear Wing Sets as shown, using M6x20 Hex Bolts, M6 Spring Washers & M6x19 Flat Washers. 10mm SSDS126_REV_A01 © 2021 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 4 Position the drawer 230mm from the back of the cab as shown. Secure the two Face Plates LH / RH (Item 5 & 6) to the drawer using four M6x12 Button Head Screws (Item 12). SSDS126_REV_A01 © 2021 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 5 Congratulations! You did it. Take a step back and admire your work! INSTALL OTHER VEHICLE AND RACK ACCESSORIES Now's the time to visit your favorite Front Runner Dealer in person or online. Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam...

Table of Contents