Advertisement
Prepare for installation
(
)
Loosely assemble the left and right hand Side Wing Sets (Items 24, 27) as shown below using two M6 x 16
A
Hex Bolts, two M6 Flat Washers, two M6 x 19 Flat Washers and two M6 Nyloc Nuts as shown (Items 19, 20,
21, 22) received with SSWS001.
(
)
Using Step 2A as a guide, loosely assemble the Corner Wings (Items 24, 25, 26) as shown.
B
( C )
Loosen the round end of the four Turn Buckles (Item 2) supplied with SSDR010. Screw a M6 Wing Nut
(Item 3) onto each round end and reassemble the Turn Buckles as shown.
REV_A02
4
Advertisement
