Front Runner SSDS110 Installation Manual

Drawer deck completion set toyota fortuner 2016-current

Advertisement

Before you start, take a moment to familiarize yourself with this Fitting Instruction and the components received.
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD
RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT
RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND
DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO
INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY
FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
SSDS110_REV_A01
DRAWER DECK COMPLETION SET
Toyota fortuner 2016-Current
READ ME !
Thank you for purchasing a Front Runner Deck Completion Set.
Refer to Page 2 for a list of all the components, quantities and tools required.
IMPORTANT WARNING!
Please call us if you have any questions about the installation of this product.
1
SSDS110
© 2019 FRONT RUNNER VEHICLE OUTFITTERS
ENG

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SSDS110 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Front Runner SSDS110

  • Page 1 FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL. NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
  • Page 2 M6x19x1SS Flat Washer Carabiner Hook 37mm M6 Spring Washer M6x16 Hex Bolt M5 Nyloc M5x10x1SS Flat Washer M5x10 Button Head Pinchweld 465mm Front Face 1LH + 1RH - With Knockouts FIGURE 1.1 REAR OF VEHICLE SSDS110_REV_A01 © 2019 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 3 Do this on left and right side of the vehicle. 14MM Move the 2 D-rings to the middle mounting holes as shown . 13MM D-Ring SSDS110_REV_A01 © 2019 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 4 Secure the drawer to the tie-down points using the items shown in 2.6 The turnbuckles and C-hooks are supplied with SSDR005 Before securing the drawer, make sure that the rear door does not interfere with the drawer. C-Hook SSDS110_REV_A01 © 2019 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 5 Assemble the two Front Faces (Item 20 or 21) to the Drawer System using M5 x 10 Button Head, M5 Flat Washers and M5 Nyloc Nuts (Item 17, 18 & 19). Fit the side decks (item 1 and 2). SSDS110_REV_A01 © 2019 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 6 Congratulations! You did it. Take a step back and admire your work! INSTALL OTHER VEHICLE AND RACK ACCESSORIES Now's the time to visit your favorite Front Runner Dealer in person or online. Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam...

Table of Contents