Front Runner 200 Series Instruction Manual

Deck completion set

Before you start, take a moment to familiarize yourself with the Fitting Instructions and the components received.

IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD

RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT

RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND

DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO

INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY

FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.

NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.

SSDS103_REV_A03

DECK COMPLETION SET

TOYOTA LAND CRUISER 200 SERIES

READ ME !

Thank you for purchasing a Front Runner Deck Completion Set.

Refer to Page 2 for a list of all the components, quantities and tools required.

IMPORTANT WARNING!

Please call us if you have any questions about the installation of this product.

SSDS103

ENG

Table of Contents

Need help?

Do you have a question about the 200 Series and is the answer not in the manual?

Page 1 FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL. NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
Page 2 M10 D-RIng 13MM 13MM M5 Nyloc Nut M5 Flat Washer Front Face - 1 Left + 1 Right M5 x 12 Button Head Bolt Front Face 1LH + 1RH With Knockouts FIGURE 1.1 SSDS103_REV_A03 © 2021 FRONT RUNNER VEHICLE OUTFITTERS...
Page 3 Place the drawer system into the vehicle, lining up the front of the drawer with the edge of the plastic trim as shown. Center the drawer left to right. SSDS103_REV_A03 © 2021 FRONT RUNNER VEHICLE OUTFITTERS...
Page 4 (Item 6 or 8) to the left and right side of the drawer using item 4, 5 and 7. Fit the side decks (Item 1) to the drawer. Refer to 1.1 SSDS103_REV_A03 © 2021 FRONT RUNNER VEHICLE OUTFITTERS...
Page 5 Congratulations! You did it. Take a step back and admire your work! INSTALL OTHER VEHICLE AND RACK ACCESSORIES Now's the time to visit your favorite Front Runner Dealer in person or online. Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam Share your adventures on: ©...

Ssds103