Table of Contents
Advertisement
2 Screw the battery mounting plate onto the
PowerTube 625 battery with original Bosch
screws (M4 × 8 T20). In doing so, ensure that
the removal tab faces the front of the battery.
Figure 39: Fitting the mounting plate
3 Press to push the battery cover onto the
battery. In doing so, ensure that the battery on-
off switch fits through its designated slot in the
cover.
Figure 40: Pushing the battery cover onto battery
The battery cover will lock into the fitting
grooves on the battery.
The battery can now be inserted into the frame.
MY21K01 - 32_1.0_23.09.2020
All manuals and user guides at all-guides.com
5.3.4
1 Detach the upper interface (lock side) from
Figure 41: Detaching the upper interface
2 Fasten the PowerTube extension to the Bosch
Figure 42: Fitting the PowerTube extension
3 Screw the battery mounting plate onto the
Fit battery cover onto Bosch
PowerTube 500 battery (horizontal)
the Bosch PowerTube 625 battery with a
TORX® T20 wrench.
PowerTube 500 battery using the two
M4 x 8 T20 screws supplied. In doing so,
ensure that the closed side faces the front of
the battery (towards on-off switch). The
smooth upper surface of the PowerTube
extension must face upwards, away from the
battery.
PowerTube extension with original Bosch
screws (M4 × 8 T20). To do so, use the
PowerTube extension screw plate as a counter
support. When positioning the extension,
ensure that the removal tab faces the front of
the battery.
Assembly
43
Advertisement
Table of Contents
