Checking The Quick Release; Maintaining The Stem; Adjusting The Gear Shift; Cable-Operated Gear Shift, Single-Cable - Bosch KETTLER Traveller E-Silver 7 RT Manual

8.2.1

Checking the quick release

 Check the position and clamping force of the
quick release lever. The quick release lever
must be flush with the lower housing. You must
be able to see a slight impression on the palm
of your hand when you close the quick release
lever.
Figure 114: Adjusting the quick release clamping force
 Use a 4 mm hexagon socket spanner to adjust
the clamping lever clamping force if required.
Check the quick release lever position and
clamping force.
Figure 115: Adjusting the quick release clamping force
MY21K01 - 32_1.0_24.09.2020
All manuals and user guides at all-guides.com
8.3
Incorrectly fastened screws may come loose due
to impact. The stem may no longer be firmly fixed
in its position as a result. This will cause a crash
with injuries.
 Check the handlebars and the stem's quick
8.4
If you cannot select the gears effortlessly, you will
need to adjust the setting for the shift cable
tension.
 Carefully pull the adjusting sleeve away from
 Check the gear shift function after each
8.4.1
Only applies to pedelecs with this equipment
 For a smooth gear shift, adjust the adjusting
Figure 116: Adjusting sleeve (1) for the single-cable,
cable-operated gear shift with shifter housing (2), example

Maintaining the stem

release system are firmly in position after the
first two hours of riding.

Adjusting the gear shift

the shifter housing, turning it as you do so.
adjustment.
Cable-operated gear shift, single-
cable
sleeves on the shifter housing.
1
Maintenance
2
105