2 Use a ratchet to remove the two 4 mm hexagon
screws in the PowerTube adapter. If you don't
have a ratchet, you can use a hexagonal key to
remove the screws.
Figure 33: Removing the 4 mm hexagon screws
3 Use a ratchet to remove the two 4 mm hexagon
screws in the PowerTube adapter.
Figure 34: Removing hexagon screws
4 Pull out the PowerTube adapter.
Figure 35: Pulling out the PowerTube adapter
MY21K01 - 32_1.0_23.09.2020
All manuals and user guides at all-guides.com
5 Use adapter plates to adjust the distance if
Figure 36: Fitted adapter plates
6 Use a TORX® T25 wrench to fasten the screws
Figure 37: Fastening the battery mount
5.3.3
1 Detach the upper interface (lock side) from
Figure 38: Detaching the upper interface
necessary.
into the battery mount.
Fit battery cover onto Bosch
PowerTube 625 battery (horizontal)
the Bosch PowerTube 625 battery with a
TORX® T20 wrench.
Assembly
42