Table of Contents
Advertisement
6.5.8.1 Adjusting the Suntour rear frame
damper
Only applies to pedelecs with this equipment
Figure 93: Suntour compression adjuster on the rear
frame damper
Turn the compression adjuster towards – to
increase rebounding.
Turn the compression adjuster towards + to
reduce deflection movement.
MY21K01 - 32_1.0_24.09.2020
All manuals and user guides at all-guides.com
1
6.5.8.2 Adjusting the RockShox compression
adjuster
Only applies to pedelecs with this equipment
1 Set the compression adjuster to the middle
position.
2 Ride the pedelec over a small obstacle.
To improve efficiency on hilly and flat terrain,
turn the compression adjuster clockwise to
increase compression damping and hardness
and reduce the deflection speed.
Figure 94: Changing compression adjuster to a harder
setting
To increase sensitivity to small bumps, turn the
compression adjuster anti-clockwise to
decrease damping and hardness and increase
the deflection speed.
Figure 95: Changing compression adjuster to a softer
setting
3 The ideal setting for the rebound damper has
been achieved when the rebound movement of
the rear wheel feels comparable to that of the
front wheel.
Operation
71
Advertisement
Table of Contents
