Table of Contents
Advertisement
9.1.7
Other errors
Symptom
Cause
Two beeps will sound if a
switch is pressed but the
Pressed switch mode has been
switch cannot be
deactivated.
operated.
A fault or warning has occurred. This
Three beeps are
occurs when an error message is
sounded.
displayed.
When you use an
electronic gear shift, you
This is because the on-board computer
can feel that pedal
sets the pedal assistance to the
assistance becomes
optimum level.
weaker when the gear is
changed.
A noise can be heard
after switching.
It is normal to hear a
noise coming from the
The gear shift setting may not have
rear wheel when cycling
been made properly.
as normal.
If the pedelec stops, gear
transmission does not
You may have applied too much
switch to the position pre-
pressure on the pedals.
configured in the
functional feature.
Table 43: Error solution for battery
MY21K01 - 32_1.0_24.09.2020
All manuals and user guides at all-guides.com
Remedy
This is not a malfunction.
Follow the instructions for the code indicated on the display
screen in Section 6.2 System Messages.
This is not a malfunction.
Contact your specialist dealer.
Contact your specialist dealer.
It is easier to change gears if you press onto the pedals gently.
Troubleshooting, fault clearance and repair
111
Advertisement
Table of Contents
