Electrical Section - BORETTI CFBG902AN2 Instruction On Mounting And Use Manual

10 Electrical section

Important:
The cooker must be installed in accordance with the manufacturer's
instructions. Incorrect installation, for which the manufacturer accepts no
responsibility, may cause injury to persons or animals etc.
General
* Connection to the mains must be carried out by qualified personnel in
accordance with current regulations.
* The appliance must be connected to the mains checking that the voltage
corresponds to the value given in the rating plate and that the electrical cable
sections can withstand the load specified on the plate.
* The plug must be connected to an earthed socket in compliance with safety
standards.
* The appliance can be connected directly to the mains placing an omnipolar
switch with minimum opening between the contacts of 3 mm between the
appliance and the mains.
* The power supply cable must not touch the hot parts and must be positioned
so that it does not exceed 75°C at any point.
* Once the appliance has been installed, the switch or socket must always be
accessible.
N.B.
For connection to the mains, do not use adapters, reducers or brancing
devices as they can cause overheating and burning.
If the installation requires alterations to the domestic electrical system or
if the socket and appliance plug are incompatible, call an expert. He should
also check that the socket cable section is suitable for the power absorbed
by the appliance.
Important:
This cooker must be conected to a suitable double pole control unit
adjacent to the cooker.
Warning!
This appliance must be earthed.
66