BORETTI CFBG902AN2 Instruction On Mounting And Use Manual page 40

Stainless steel, aluminium parts, painted and silk-screen printed
surfaces
Clean using an appropriate product. Always dry thoroughly.
Important
These parts must be cleaned very carefully to avoid scratching and
abrasion. You are advised to use a soft cloth and neutral soap.
Caution
Do not use abrasive substances or non-neutral detergents as these will
irreparably damage the surface.
Important
The manufacturer declines all liability for possible damage caused by the
use of unsuitable products to clean the appliance.
Attention!
The appliance gets very hot, mainly around the cooking areas. It is very
important that children are not left alone in the kitchen when you are
cooking.
Do not use a steam cleaner because the moisture can get into the
appliance thus make it unsafe.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the
oven door glass or the glass lid (models with glass lid only) since they can
scratch the surface, which may result in shattering of the glass.
Gas taps
Periodic lubrication of the gas taps must be carried out by specialist
personnel only. In the event of operating faults in the gas taps, call the
Service Department.
38