Table of Contents
Advertisement
Editor - Auto start
Editor Auto start
is used to enable/disable auto restart. When enabled, the unit will automatically
restart after a power failure or power interruption condition, or when standby is selected. The restart
will operate to the last setpoint or to the last ramp step that was running before the interruption.
1. Use the arrow buttons to highlight
SP1
Editor
Settings
System
Installation
3. Use the arrows to highlight
Setpoints
Ramp Program
Auto start
Menu
Auto Start
5. For both
to toggle between
With the desired setting showing press
Menu
use the
window, to save and return to the
previous display.
Thermo Scientific
Editor.
Menu
Auto start
.
Timer
and
press
ON
OFF
and
.
, or
2. Press
to display the submenu.
Setpoints
Ramp Program
Auto start
Menu
4. Press
to display the status.
Auto Start
Timer
Timer
Menu
Timer
6. The second
start/stop time and date.
Start Time/Date
12:00:00
01/01/2010
Stop Time Date
Menu
Section 4 Operation
OFF
ON
is used to set the timer
O
4-11
Advertisement
Table of Contents
