Table of Contents
Advertisement
CAUTION
CAUTION
CAUTION
Thermo Scientific
For refrigerated baths:
Ensure all communication and electrical connections are made
prior to starting the unit.
•
Install the power cord from the connector on the rear of the
controller, A, to the connector on the rear of the refrigerated bath, B.
•
Connect the bath's power cord, C, to a grounded power outlet.
B = Power Outlet to Thermostat
C = Power Inlet
•
Install the supplied communications cable between the thermostat
and the bath RJ45 connectors (similar to Ethernet).
Communication
Cable required for
proper communication
between the bath and the
thermostat.
Communication
For refrigerated baths, never connect controller power inlet, A, to
a power outlet. Never connect power outlet, B, to anything but a
thermostat.
Ensure the electrical cords do not come in contact with any of the
plumbing connections or tubing.
Thermostat
A = Power Inlet from Bath
Bath
Section 3 Installation
3-3
Advertisement
Table of Contents
