9.2.5. C
OOLDOWN TIME
It is possible to set the cooldown time for each exercise, ranging from 5 to 180 seconds. To change
the setting, when the display shows the currently selected maximum time:
Press the ENTER key to change the parameter: the current value of the parameter will start to blink,
at this point press the CLEAR key to erase the current value and then use the number keys to enter
the desired new value.
The default value of this parameter is 60.
If you are exercising with a TGS key, the cooldown will be stopped if you extract the key.
9.2.6. E
TGS
NABLE
It is possible to enable or disable the use of the TGS reader. To change the selection, when the
display shows the current setting:
Press the +/- GOAL keys to select the desired option out of those listed in the table below:
9.2.7. E
NABLE KEYBOARD
It is possible to disable the keyboard so that the machine can only be used with the TGS. To change
the selection, when the display shows the current setting:
Press the +/- GOAL keys to select the desired option out of those listed in the table below:
Pagina 9.10
RUN NOW Excite +: Technical Service guide - rev. 6.2
COOLDOWN TIME xxx
TGS : xxx
TGS
ENABLED
<default>
DISABLED
KEYS : xxx
K
EYS
ENABLED
<default>
DISABLED
Need help?
Do you have a question about the RUN NOW EXCITE + and is the answer not in the manual?
Questions and answers